-
Chengli Automobile Industry Park
Methods to eliminate washing and sweeping car operation errors
How to Use Your Street Sweeper Truck Correctly
A street sweeper truck is a big helper for keeping roads clean. But you need to know how to use it right. If you make mistakes, your truck might stop working. This guide will help you use your truck the safe way!
Table of Contents
Why This Guide Matters
Street sweeper trucks use strong water spray to clean roads. If you use them wrong, you could:
- Hurt yourself or others
- Break the truck
- Waste time and money
Let’s learn how to use your street sweeper truck the right way!
Step-by-Step Guide to Using Your Sweeper Truck
Getting Ready to Clean
Before you start cleaning with your truck:
- Check all the parts
- Make sure you have enough water
- Park in the right spot
- Turn on the truck safely
Where to Park Your Truck
Good parking is very important!
- Park in a straight line at the drain spot
- Put your truck at the downstream drain hole
- Face your truck toward downstream
- If the pipe is very dirty, start cleaning from the downstream drain
- For normal dirt, start from the upstream drain
How to Clean When There’s Lots of Dirt
If the road is very dirty:
- You might need to clean more than once
- Watch the water pressure gauge
- Add more water if the level gets too low
Going Backward While Cleaning
When you need to back up and clean:
- Have someone help guide the hose
- Set the hose reel to “collect” mode
- Make it turn counter-clockwise to roll up the hose
- Set the speed based on how dirty the road is
- Open the washing needle valve
- Step on the gas to get 1000-1200 turns per minute
- Slow down when you get close to the drain hole
Important Parts to Check Before Starting
Use this checklist before you start your road sweeper:
| Part to Check | What to Look For |
|---|---|
| Control Panel | Hand gas on “low” position |
| Control Panel | High pressure valve on “return water” |
| Oil System | Oil tank is full |
| Oil System | Two valves below tank are open |
| Water System | Water tank is full of clean water |
| Water System | Water valves are open |
| Water System | Filter is not clogged |
| Water System | Water pump has enough oil |
Control Settings
Make sure:
- Tube handle is in “stop” position
- Speed knob is in “slow” position
- Pressure switch is “off”
- Wash tube is “closed”
After checking all these things, start the engine and move the pump lever backward. Then the pump will start working slowly.
Safety Tips for Everyone
Stay safe with these rules:
- Never leave the control panel when working
- Put the spray head in the pipe before opening the valve
- Stay away from the spray head – it can hurt you!
- Don’t use high pressure for washing walls or cars
- Only use clean water – dirty water hurts the machine
How to Fill Your Water Tank
- Check and clean the filter first
- Connect the water hose to a fire hydrant or water truck
- Connect the other end to your water tank
- Watch the water level on your dashboard gauge
For Different Road Cleaning Jobs
Your road maintenance vehicle can help with many cleaning tasks:
- Dry Roads: Use regular settings
- Very Dirty Roads: You may need to clean twice
- Narrow Streets: Be extra careful with parking
- Downtown Areas: Watch for people and cars
Using your street cleaning truck the right way will make it work better and last longer!
Conclusion
Learning how to use your sweeper truck right is important for:
- Keeping your truck working well
- Staying safe
- Cleaning roads well
Follow these steps, and you’ll be a pro at using your street sweeper!
